Configuring VNC endpoints

You can configure a VNC (Virtual Network Computing) endpoint on the MCU by choosing Endpoints > Add VNC. This makes it easier to add a VNC session to conferences because you can choose its name from a list rather than type its network address.

You can add VNC endpoints to the MCU. This enables you to have software applications running on a remote computer added to a conference. For example, if a speaker has a set of slides to present during a conference, you can add them as a VNC endpoint. After entering the settings, click Add endpoint.

Field	Field description	Usage tips
Name	The name of the computer used for the VNC application (VNC endpoint).
Host name or IP address	The IP address or host name of the computer used for the VNC application (VNC endpoint).	Note that square brackets are mandatory for IPv6 addresses.
Port	The port used for communication to the VNC endpoint.
Password	The VNC server password for the computer you're trying to view.
Re-enter password	Re-enter the VNC password.
Automatic disconnection	When a participant disconnects from a conference and only endpoints set to Automatic disconnection are left, all those participants are disconnected.	Set to enabled if you want this endpoint to be automatically disconnected from conferences when only endpoints set to Automatic disconnection remain in a conference when any other participant has disconnected.

	MCU 4510
	�� 0 MCU

Configuring VNC endpoints

Related topics